This video is to show the violent cogging effect caused by the new magnet arrange on my Steorn replication motor test platform. This is caused by the intensely strong magnetic attraction to the toroidal coil’s cores due to the new magnet arrangement.
16 comments
No ping yet
fittingciobb says:
February 7, 2013 at 6:24 am (UTC 0)
Energy sources without the need for fuel or energy input exist ,But the coverup is very strong,Get a motor that works with the power of magnets only at LT-MAGNET-MOTORdotCOM ,take part in the revolution!
perplexfraction says:
February 7, 2013 at 6:45 am (UTC 0)
Free Energy is real and its here! The Oil companies are doing everything in their power to stop these
information. If you want a Free energy machine do a search in youtube for the LT MAGNET MOTOR , Join the
revolution!
transfusablepng says:
February 7, 2013 at 7:28 am (UTC 0)
Free Energy is real and its here! The Oil companies are doing everything in their power to stop these information. If you want a Free energy machine do a search in youtube for the LT MAGNET MOTOR , Join the revolution!
valveman12 says:
February 7, 2013 at 7:36 am (UTC 0)
Mounting the toroids 90 degrees from the position you have now and further from the rotor will eliminate most of the cogging.
15666Matthew says:
February 7, 2013 at 7:57 am (UTC 0)
Very nice experiment. It showed exactly what I wanted to see. It appears that the windings on the toroid core need to generate sufficient mmf to overcome the external field of the rotor magnets. It would have probably worked if you could increase the amperage to the coils. This would give it much more torque, however the drive power would increase accordingly. Sad to say, that’s why one probably will not reach overunity. Thanks again for a very informative experiment.
john1966elliott says:
February 7, 2013 at 8:54 am (UTC 0)
This is sound like airplane’s engine, But it is cool motor.
Ashley Morel says:
February 7, 2013 at 9:33 am (UTC 0)
Excellent work!~
overunitydotcom says:
February 7, 2013 at 9:36 am (UTC 0)
Well done Ossie !
Great forces !
A real iron bar backing plate instead
of just the round nonfitting washer would even give higher attraction forces.
Would love to see the cap charging BackEMF recycling circuit. Many thanks.
gilbondfac says:
February 7, 2013 at 10:05 am (UTC 0)
very good work !! i’m fan of your work ! but here the current to brake the magnetic field ..????
demios99 says:
February 7, 2013 at 10:43 am (UTC 0)
I think they’re aluminium brackets, not steel ones. At least they look like it.
Anyhow, it looks promising 😀
zjmakree says:
February 7, 2013 at 11:04 am (UTC 0)
Please make sure that the brackets holding the coil is not being attracted by the neos.
k4zep says:
February 7, 2013 at 11:13 am (UTC 0)
Holy Cow Ossie! must be getting late, run it tomorrow!!!!!
I heard you say Ouch. You might have to brace your coils better!!!!!
wopwops0482 says:
February 7, 2013 at 11:15 am (UTC 0)
I hope you don’t melt your drive coils trying to unstick those suckers!
Larskro says:
February 7, 2013 at 11:39 am (UTC 0)
Hi. Now is important that your core material has a low permeabillity. (Soft iron pauder) You can see that, by tunning the motor with your hand, and se how fast it stop. Shows the losses in the cores.
proteinman81 says:
February 7, 2013 at 12:25 pm (UTC 0)
Appreciate the video, cant wait to see it run.
broli123 says:
February 7, 2013 at 12:42 pm (UTC 0)
Please energize the coils with DC and see if it still cogs as much.